From: McCallum
Date: Tue Jun 03 2003 - 08:39:11 GMT-3
yep
> -----Original Message-----
> From: Shahid Shafi [mailto:sshafi@qualcomm.com]
> Sent: 03 June 2003 11:03
> To: ccielab@groupstudy.com
> Subject: RE: VoIP dial-peer question
>
>
> it should be .T not T. Right?
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> McCallum
> Sent: Tuesday, June 03, 2003 1:14 AM
> To: 'Messina; John V'; CNLink Technical; ccielab@groupstudy.com
> Subject: RE: VoIP dial-peer question
>
>
> or you can press # to override the default interdigit timeout
>
> > -----Original Message-----
> > From: Messina, John V [mailto:john@crimsoncti.com]
> > Sent: 03 June 2003 00:56
> > To: CNLink Technical; ccielab@groupstudy.com
> > Subject: RE: VoIP dial-peer question
> >
> >
> > For obvious reasons I have never used T by itself
> > but even if that does work a more effecient method for the
> > scenario you desribe would be to use
> >
> > ....
> >
> > this will route the call as soon as it matches
> >
> > with T it will wait until the interdigit timeout which
> > defaults to 10 seconds
> >
> >
> >
> > -----Original Message-----
> > From: CNLink Technical [mailto:tech_support@us.cnlink.net]
> > Sent: Mon 6/2/2003 3:37 PM
> > To: ccielab@groupstudy.com
> > Cc:
> > Subject: RE: VoIP dial-peer question
> >
> >
> >
> > Also
> >
> > +(Optional) Character indicating an E.164 standard number.
> >
> > Be sure to read this page completely
> >
> > http://www.cisco.com/univercd/cc/td/doc/product/software/ios12
> 3/123cgcr/vvfa
> x_c/int_c/dpeer_c/dp_confg.htm
>
> JC Cham
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com]On Behalf Of
> McCallum, Robert
> Sent: Monday, June 02, 2003 6:51 AM
> To: 'Juan Manuel Munarriz Gonzalez'; ccielab@groupstudy.com
> Subject: RE: VoIP dial-peer question
>
>
> T
>
> > -----Original Message-----
> > From: Juan Manuel Munarriz Gonzalez [mailto:munarriz@satec.es]
> > Sent: 02 June 2003 13:13
> > To: ccielab@groupstudy.com
> > Subject: VoIP dial-peer question
> >
> >
> > Hello,
> >
> > I4ve seen in a lab test training a problem with a router with
> > two FXS ports and a VoIP dial-peer with extensisn 3002. The
> > router must be configure to reach the extensisn 3002 without
> > configuring a specified number. Beside this it asks for
> > configure E164 style.
> > Have you got any idea about such dial-peer configuration?.
> >
> > Thanks in advance
> > ____________________________________________
> >
> > Juan Manuel Munarriz Gonzalez
> > Dpto. Ingenieria de red
> > email: munarriz@satec.es
> >
> > SATEC/CONVEX
> > Avda. Europa 34 A
> > 28023 Aravaca MADRID (SPAIN)
> > Tlf.: +34 91 708 90 00 | +34 91 211 03 00
> > Fax.: +34 91 708 90 90 | +34 91 211 03 90
> > ____________________________________________
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:52 GMT-3