From: Adam Asay (aasay@cerberian.com)
Date: Fri May 30 2003 - 16:41:08 GMT-3
Yasser,
This may not be correct for a 7500, but I believe you need a bootloader
in the onboard flash. This bootloader will then be pointed to the image
on your flash card.
You do this on the 6500 like this
boot system flash slot0:c6sup22-jsv-mz.121-11b.E4
boot bootldr bootflash:c6msfc2-boot-mz.121-11b.E4
Once again, I am not sure if it is the same on the 7500's.
Good Luck.
Adam Asay
SR Systems Engineer
aasay@cerberian.com
On Fri, 2003-05-30 at 12:29, Yasser Aly wrote:
> Dear All, I have a 7513 and was trying to upgrade it's boot amd main
> image to another version.Neither Flash nor Slot0 had enough space to hold
> the new image so I inserted a 350M Disk1at slot1 and uploaded the new
> image on. Reloading the router, it failed to boot from the new image and
> the following errors came to console ------------------open failed due to
> full file table
> loadprog: error - on file open
> open: failed to find and/or load the bootloader:
> "disk1:rsp-boot-mz.122-14.S1.bin"
> loadprog: error - on file open
> open: failed to find and/or load the bootloader:
> "disk1:rsp-boot-mz.122-14.S1.bin"
> loadprog: error - on file open
> open: failed to find and/or load the bootloader:
> "disk1:rsp-boot-mz.122-14.S1.bin"
> loadprog: error - on file open
> open: failed to find and/or load the bootloader:
> "disk1:rsp-boot-mz.122-14.S1.bin"
> loadprog: error - on file open
> open: failed to find and/or load the bootloader:
> "disk1:rsp-boot-mz.122-14.S1.bin"
> loadprog: error - on file open
> open: failed to find and/or load the bootloader:
> "disk1:rsp-boot-mz.122-14.S1.bin"
> loadprog: error - on file open
> boot: cannot load "cisco2-RSP4"---------------------------------- Boot
> sequence set is as follows 7513#show run | in boot
> boot system disk1:rsp-pv-mz.122-14.S1.bin
> boot system slot0:rsp-jsv56i-mz.121-11b.E11.bin
> boot bootldr disk1:rsp-boot-mz.122-14.S1.bin
> Part of dir all containing files stored on Disk1 7513#dir all
> Directory of disk1:/ 1 -rw- 7825368 May 29 2003 04:09:28
> rsp-boot-mz.122-14.S1.bin
> 2 -rw- 15973548 May 29 2003 05:13:40 rsp-pv-mz.122-14.S1.bin
> Anybody have a reason for this to happen ? Router booted from Slot0 using
> old image. Regards,Yasser
>
> ------------------------------------------------------------------------
>
> MSN 8 with e-mail virus protection service: 2 months FREE*
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:50 GMT-3