From: Yasser Aly (blackyeyes00@hotmail.com)
Date: Fri May 30 2003 - 17:13:44 GMT-3
Hi Adam,
The problem is that the onboard flash doesn't have enough space to hold
the new boot image and I was trying this maybe it works. If this is not
possible then no alternative except upgrading the onboard bootflash
>From: Adam Asay > >Yasser, > >This may not be correct for a 7500, but I
believe you need a bootloader >in the onboard flash. This bootloader will
then be pointed to the image >on your flash card. > >You do this on the
6500 like this > >boot system flash slot0:c6sup22-jsv-mz.121-11b.E4 >boot
bootldr bootflash:c6msfc2-boot-mz.121-11b.E4 > >Once again, I am not sure
if it is the same on the 7500's. > >Good Luck. > >Adam Asay >SR Systems
Engineer >aasay@cerberian.com > > >On Fri, 2003-05-30 at 12:29, Yasser
Aly wrote: > > Dear All, I have a 7513 and was trying to upgrade it's
boot amd main > > image to another version.Neither Flash nor Slot0 had
enough space to hold > > the new image so I inserted a 350M Disk1at slot1
and uploaded the new > > image on. Reloading the router, it failed to
boot from the new image and > > the following errors came to console
------------------open failed due to > > full file table > > loadprog:
error - on file open > > open: failed to find and/or load the bootloader:
> > "disk1:rsp-boot-mz.122-14.S1.bin" > > loadprog: error - on file open
> > open: failed to find and/or load the bootloader: > >
"disk1:rsp-boot-mz.122-14.S1.bin" > > loadprog: error - on file open > >
open: failed to find and/or load the bootloader: > >
"disk1:rsp-boot-mz.122-14.S1.bin" > > loadprog: error - on file open > >
open: failed to find and/or load the bootloader: > >
"disk1:rsp-boot-mz.122-14.S1.bin" > > loadprog: error - on file open > >
open: failed to find and/or load the bootloader: > >
"disk1:rsp-boot-mz.122-14.S1.bin" > > loadprog: error - on file open > >
open: failed to find and/or load the bootloader: > >
"disk1:rsp-boot-mz.122-14.S1.bin" > > loadprog: error - on file open > >
boot: cannot load "cisco2-RSP4"---------------------------------- Boot >
> sequence set is as follows 7513#show run | in boot > > boot system
disk1:rsp-pv-mz.122-14.S1.bin > > boot system
slot0:rsp-jsv56i-mz.121-11b.E11.bin > > boot bootldr
disk1:rsp-boot-mz.122-14.S1.bin > > Part of dir all containing files
stored on Disk1 7513#dir all > > Directory of disk1:/ 1 -rw- 7825368 May
29 2003 04:09:28 > > rsp-boot-mz.122-14.S1.bin > > 2 -rw- 15973548 May 29
2003 05:13:40 rsp-pv-mz.122-14.S1.bin > > Anybody have a reason for this
to happen ? Router booted from Slot0 using > > old image. Regards,Yasser
> > > >
------------------------------------------------------------------------
> > > > MSN 8 with e-mail virus protection service: 2 months FREE* > > >
>
------------------------------------------------------------------------
The new MSN 8: smart spam protection and 2 months FREE*
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:50 GMT-3