RE: A QOS question

From: Ivy Zhang (ivyzhang@nortelnetworks.com)
Date: Thu May 29 2003 - 03:23:14 GMT-3

• Next message: Emad: "Multicast: PIM type"
• Previous message: Prashanth: "my turn!!"
• Maybe in reply to: Re-act: "A QOS question"
• Next in thread: Brian Dennis: "RE: A QOS question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi, Brian

Assume you can get every information you need. What's your solution ?
Thanks a lot.

Regards,
Ivy

-----Original Message-----
From: Brian Dennis [mailto:brian@labforge.com]
Sent: 2003e945f24f% 3:11
To: 'Re-act'; ccielab@groupstudy.com
Subject: RE: A QOS question

We need more information. With this type of problem and the little
information provided any answer you get is going to be a stab in the
dark.

Here is the type of information needed:

1) What is the input rate on R1 S0/0 and R2 S0/0?
2) What is the output rate on R1 S0/0 and R2 S0/0?
3) What is the input rate on R2 Fa1/0?
4) Does R1 have a full T1 and R2 have a 56k?
etc..... etc..... etc.....

Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Re-act
Sent: Friday, May 23, 2003 2:55 AM
To: ccielab@groupstudy.com
Subject: A QOS question

If anyone would help me?

clients--(f0/0)R1(s0/0)---FR----(s0/0)R2(f1/0)----server

when clients access web and ftp on server,they find the speed is very
slow,and sometimes ftp would be disconnected,but on R1 the load was not
full,pls give a solution.use PQ or WRED,or FRTS?

• Next message: Emad: "Multicast: PIM type"
• Previous message: Prashanth: "my turn!!"
• Maybe in reply to: Re-act: "A QOS question"
• Next in thread: Brian Dennis: "RE: A QOS question"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:50 GMT-3