From: Brian Dennis (brian@labforge.com)
Date: Thu May 29 2003 - 16:19:16 GMT-3
What is the information? ;-)
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: Ivy Zhang [mailto:ivyzhang@nortelnetworks.com]
Sent: Wednesday, May 28, 2003 11:23 PM
To: Brian Dennis; ccielab@groupstudy.com
Subject: RE: A QOS question
Hi, Brian
Assume you can get every information you need. What's your solution ?
Thanks a lot.
Regards,
Ivy
-----Original Message-----
From: Brian Dennis [mailto:brian@labforge.com]
Sent: 2003年5月24日 3:11
To: 'Re-act'; ccielab@groupstudy.com
Subject: RE: A QOS question
We need more information. With this type of problem and the little
information provided any answer you get is going to be a stab in the
dark.
Here is the type of information needed:
1) What is the input rate on R1 S0/0 and R2 S0/0?
2) What is the output rate on R1 S0/0 and R2 S0/0?
3) What is the input rate on R2 Fa1/0?
4) Does R1 have a full T1 and R2 have a 56k?
etc..... etc..... etc.....
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Re-act
Sent: Friday, May 23, 2003 2:55 AM
To: ccielab@groupstudy.com
Subject: A QOS question
If anyone would help me?
clients--(f0/0)R1(s0/0)---FR----(s0/0)R2(f1/0)----server
when clients access web and ftp on server,they find the speed is very
slow,and sometimes ftp would be disconnected,but on R1 the load was not
full,pls give a solution.use PQ or WRED,or FRTS?
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:50 GMT-3