From: Brian Dennis (brian@labforge.com)
Date: Tue May 27 2003 - 20:30:23 GMT-3
Here is the config:
line vty 3
password cisco
login
rotary 1
autocommand show clock
The "rotary" line command will enable the vty line to answer to TCP port
3001 and 7001 along with the normal telnet port of 23. The autocommand
will execute and then log the user off. If the desired effect is to not
log them off then use the "autocommand-options nohangup" line command.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mike Miara
Sent: Tuesday, May 27, 2003 3:29 PM
To: ccielab@groupstudy.com
Subject: virtual term setup
I am having difficulties perfoming the following with setting up logins:
Configure vty 3 such that a telnet to this specific vty will
automatically run the show clock command.
How do you get this to work and telnet to a specific port to test it?
Thanks
Mike
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:49 GMT-3