OSPF handling

From: Emad (emad@zakq8.com)
Date: Sun May 25 2003 - 13:06:44 GMT-3

Next message: dredeze: "RE: using BGP path to destination simulaneously"
Previous message: Emad: "double or tribble CCIE"
Next in thread: Brian Dennis: "RE: OSPF handling"
Maybe reply: Brian Dennis: "RE: OSPF handling"
Maybe reply: Emad: "RE: OSPF handling"
Maybe reply: Brian Dennis: "RE: OSPF handling"
Maybe reply: Emad: "RE: OSPF handling"
Maybe reply: Daniel Free: "Re: OSPF handling"
Maybe reply: Brian Dennis: "RE: OSPF handling"
Maybe reply: Yu Kay: "RE: OSPF handling"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Dear folks,
Is there a special treatment that ospf does with traffic of IPs range encapsulated into PPP , as example:

Interface BRI 0/0
Ip add 172.16.230.0 255.255.255.0

Dialer-group 1
!

access-list 1 permit 172.16.230.0 0.0.0.255
dialer-list 1 permit ip protocol

The solution stated that we should use Wild card with this range instead of writing the network only because of OSPF special treatment to PPP encapsulated traffic

Thanx in advance
s

Next message: dredeze: "RE: using BGP path to destination simulaneously"
Previous message: Emad: "double or tribble CCIE"
Next in thread: Brian Dennis: "RE: OSPF handling"
Maybe reply: Brian Dennis: "RE: OSPF handling"
Maybe reply: Emad: "RE: OSPF handling"
Maybe reply: Brian Dennis: "RE: OSPF handling"
Maybe reply: Emad: "RE: OSPF handling"
Maybe reply: Daniel Free: "Re: OSPF handling"
Maybe reply: Brian Dennis: "RE: OSPF handling"
Maybe reply: Yu Kay: "RE: OSPF handling"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:47 GMT-3