From: Brian Dennis (brian@labforge.com)
Date: Sat May 24 2003 - 17:40:22 GMT-3
I'm not aware of a way to configure a standard WIC-1DSU-T1 for a PRI.
You need a module that supports a PRI like the NM-1CT1-CSU model.
Understanding 1- or 2-Port ISDN PRI/Channelized T1 Network Module
http://www.cisco.com/en/US/products/hw/modules/ps2797/products_tech_note
09186a00800ad36f.shtml
Understanding the 1-Port T1 CSU/DSU WAN Interface Card (WIC-1DSU-T1)
http://www.cisco.com/en/US/products/hw/modules/ps3129/products_tech_note
09186a00800b1501.shtml
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Michael Pearson
Sent: Saturday, May 24, 2003 11:08 AM
To: ccielab@groupstudy.com
Subject: T1/PRI configuration ?
Hello All,
Does anyone know how to properly configure a T1 WIC inserted into a
Cisco
2621 router, as a T1/PRI interface?
Thanks in advance,
Michael
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:47 GMT-3