Re: T1/PRI configuration ?

From: Jay Hennigan (jay@west.net)
Date: Sat May 24 2003 - 17:29:41 GMT-3

• Next message: Brian Dennis: "RE: T1/PRI configuration ?"
• Previous message: Brian Dennis: "RE: is frame-relay inverse-arp really disabled?"
• Maybe in reply to: Michael Pearson: "T1/PRI configuration ?"
• Next in thread: Brian Dennis: "RE: T1/PRI configuration ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

On Sat, 24 May 2003, Michael Pearson wrote:

> Hello All,
>
> Does anyone know how to properly configure a T1 WIC inserted into a Cisco
> 2621 router, as a T1/PRI interface?

You don't.

You can configure a VWIC-1MFT-T1 as such, but only for voice call
termination, not ISDN data. And this requires an NM-HDV in the router.

http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a00800f9d37.shtml#

-- 
Jay Hennigan - CCIE #7880 - Network Administration - jay@west.net
NetLojix Communications, Inc.  -  http://www.netlojix.com/
WestNet:  Connecting you to the planet.  805 884-6323

• Next message: Brian Dennis: "RE: T1/PRI configuration ?"
• Previous message: Brian Dennis: "RE: is frame-relay inverse-arp really disabled?"
• Maybe in reply to: Michael Pearson: "T1/PRI configuration ?"
• Next in thread: Brian Dennis: "RE: T1/PRI configuration ?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:47 GMT-3