From: Oliver Ziltener (ziltener@netcloud.ch)
Date: Fri May 23 2003 - 14:09:29 GMT-3
Hello
is my problem related to the IOS version?
thanks Oliver
R4(config)#inter e0/0
R4(config-if)#m
R4(config-if)#mt
R4(config-if)#mtu ?
<64-18000> MTU size in bytes
R4(config-if)#mtu 1000
% Interface Ethernet0/0 does not support user settable mtu.
% At least one member of the channel group 0 is not a 2FE port adapter
R4(config-if)#
R4(config-if)#
R4(config-if)#
R4(config-if)#
R4#show ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-JK2O3S-M), Version 12.1(5)T9, RELEASE
SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Sun 24-Jun-01 08:57 by cmong
Image text-base: 0x80008088, data-base: 0x814CE3A0
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
R4 uptime is 1 hour, 30 minutes
System returned to ROM by reload at 01:38:50 UTC Mon Mar 1 1993
System image file is "flash:c2600-jk2o3s-mz.121-5.T9.bin"
cisco 2611 (MPC860) processor (revision 0x203) with 56320K/9216K bytes of
memory.
Processor board ID JAD0419085H (2521747323)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
R4#
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:47 GMT-3