From: Jeongwoo Park (jpark@wams.com)
Date: Thu May 22 2003 - 01:06:21 GMT-3
Hi all,
I get an error when I tried to configure the backup peer as following;
r1(config)#$Serial0/0.14 104 backup-peer frame-relay interface s0/0.123 102
%Must remove the remote-peer to change backup option
I am using dlsw lite encapsulation.
r2(spoke)----------r1(hub)----------r4(spoke)
r1;
dlsw remote-peer 0 frame-relay interface Serial0/0.14 104
dlsw remote-peer 0 frame-relay interface Serial0/0.123 102
Now, I want to configure the backup peer on the second line as following, so
that r1 to r2 become the primary, and r1 to r4 become the backup.
r1(config)#dlsw remote-peer 0 frame-relay interface Serial0/0.14 104
backup-peer frame-relay interface s0/0.123 102
%Must remove the remote-peer to change backup option
What am I missing?
Thanks,
JP
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:46 GMT-3