From: OhioHondo (ohiohondo@columbus.rr.com)
Date: Fri May 16 2003 - 11:40:47 GMT-3
I believe the OSPF hello's,LSA updates and any other OSPF info still happens
over the ISDN link --- so to alleviate the costs of ISDN being up you should
configure some type of backup.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jung, Jin
Sent: Friday, May 16, 2003 7:20 AM
To: 'Tom Young'; ccielab@groupstudy.com
Subject: RE: backup line in OSPF
I believe so,,
Jin jung...
-----Original Message-----
From: Tom Young [mailto:gitsyoung@yahoo.co.jp]
Sent: Friday, May 16, 2003 4:57 AM
To: ccielab@groupstudy.com
Subject: backup line in OSPF
Hi, group
My router's serial interface and bri interface are in
the ospf area. And I set the demand-circult command on the
bri interface, the bri interface's cost is higher than
serial interfaec , so the serial was routed first, in this environment, I
don't need the backup command on serial interface , right? The bri with
backup the serial interface, and when the serial interface recovery, the bri
will time-out and go to down, right?
Thanks alot
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:44 GMT-3