From: Jonathan V Hays (jhays@jtan.com)
Date: Wed May 14 2003 - 16:18:30 GMT-3
Nonsense - you aren't screwed. You just need to practice a more careful
method of configuring and troubleshooting. You should add one thing at a
time and test it after adding. Get everything working first and THEN
apply authentication. This applies to ISDN, OSPF, or any technology. If
the link dies after you add authentication you don't even need debug to
tell you that authentication is the problem.
And once you have configured it in your lab 10 or 20 times you will have
seen most of the common mistakes and be on guard against them.
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Jeongwoo Park
> Sent: Wednesday, May 14, 2003 12:26 PM
> To: 'tschaffran@cconlinelabs.com'; 'Joe Martin';
> 'ccielab@groupstudy.com'
> Subject: RE: ISDN doesn't stay up more than a second
>
>
> Thanks, all
> I think there were a space.
> I removed and typed it again. And it came up.
> Imagine it happens in the actual lab. You are screwed.
>
> Thanks,
> JP
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:43 GMT-3