Re: OSPF basic configuration problem

From: Peter van Oene (pvo@usermail.com)
Date: Wed May 14 2003 - 16:26:04 GMT-3

• Next message: Jonathan V Hays: "RE: ISDN doesn't stay up more than a second"
• Previous message: Jason Graun: "RE: TCP ping"
• Maybe in reply to: keyser soze: "OSPF basic configuration problem"
• Next in thread: Jerry Haverkos: "RE: OSPF basic configuration problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Couple things..

First off, I'd highly recommend you use the 0.0.0.0 method of adding
interfaces to OSPF. It's far more precise. Also, can we get a snapshot of
each routers type 1 LSA (I assume the adjacency is up?)

Thanks

pete

ps-area 0 is not necessary in single area ospf networks.

At 07:28 AM 5/14/2003 +0000, keyser soze wrote:
>Hi all.
>
>I've a problem configuring OSPF between two routers via ethernet. The sh
>ip route only shows directly connected networks. I'm pasting the running
>config below. Any help would be appreciated.
>
>---- R1 -----
>hostname R1
>
>interface Loopback0
>ip address 131.108.4.1 255.255.255.128
>!
>interface Loopback1
>ip address 131.108.4.129 255.255.255.128
>!
>interface Loopback2
>ip address 131.108.5.1 255.255.255.224
>!
>interface Ethernet0
>ip address 131.108.1.1 255.255.255.0
>!
>interface Serial0
>no ip address
>shutdown
>no fair-queue
>!
>interface Serial1
>no ip address
>shutdown
>!
>interface BRI0
>no ip address
>shutdown
>!
>router ospf 1
>log-adjacency-changes
>network 131.108.1.0 0.0.0.255 area 1
>network 131.108.4.0 0.0.0.127 area 1
>network 131.108.4.128 0.0.0.127 area 1
>network 131.108.5.0 0.0.0.31 area 1
>!
>ip classless
>ip http server
>
>---- R1 -----
>hostname R2
>!
>!
>!
>!
>!
>!
>ip subnet-zero
>!
>!
>!
>!
>!
>!
>interface Loopback0
>ip address 131.108.5.3 255.255.255.224
>!
>interface Loopback1
>ip address 131.108.6.1 255.255.255.255
>!
>interface Loopback2
>ip address 131.108.6.2 255.255.255.255
>!
>interface Ethernet0
>ip address 131.108.1.2 255.255.255.0
>!
>interface Serial0
>no ip address
>shutdown
>no fair-queue
>!
>interface Serial1
>no ip address
>shutdown
>!
>
>router ospf 2
>log-adjacency-changes
>network 131.108.1.0 0.0.0.255 area 1
>network 131.108.5.32 0.0.0.31 area 1
>network 131.108.6.1 0.0.0.0 area 1
>network 131.108.6.2 0.0.0.0 area 1
>!
>ip classless
>ip http server
>
>Thanks.
>
>_________________________________________________________________
>Protect your PC - get McAfee.com VirusScan Online
>http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963

• Next message: Jonathan V Hays: "RE: ISDN doesn't stay up more than a second"
• Previous message: Jason Graun: "RE: TCP ping"
• Maybe in reply to: keyser soze: "OSPF basic configuration problem"
• Next in thread: Jerry Haverkos: "RE: OSPF basic configuration problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:43 GMT-3