From: Brian Dennis (brian@labforge.com)
Date: Wed May 14 2003 - 10:29:28 GMT-3
When you are using dialer strings think of the interface as
Point-to-point. All packets sent on the interface will be "mapped" to
the dialer string number. This includes all broadcast and multicast
packets.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
Director of CCIE Training and Development - IPexpert, Inc.
Mailto: brian@ipexpert.net
Toll Free: 866.225.8064
Outside U.S. & Canada: 312.321.6924
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tom Young
Sent: Tuesday, May 13, 2003 8:47 PM
To: ccielab@groupstudy.com
Subject: broadcast parameter
Hi, group
If I use the dialer-map on the bri interface, I could
set the broadcast parameter, but if I use the dialer
string command , not the dialer map. How can I set the
broadcast command ?
Thanks alot
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:42 GMT-3