RE: ospf/rip VLSM

From: OhioHondo (ohiohondo@columbus.rr.com)
Date: Tue May 13 2003 - 09:07:45 GMT-3

• Next message: Malik Javid: "RE: How to Allow only one MAC address and IP Address"
• Previous message: C.Sammarcellino@sirtisistemi.it: "IP Mobile (help need)"
• Maybe in reply to: Ram Shummoogum: "ospf/rip VLSM"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

What is the IP address and subnet mask between r2 and r4 ?

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Ram Shummoogum
Sent: Monday, May 12, 2003 4:25 PM
To: ccielab@groupstudy.com
Subject: ospf/rip VLSM

                 Area 12
            r1-------------r2------ripv1-------r4
                       |
                       |Area 0
                       |
                       r5

r1 to r2 have 172.29.12.0/26
r2 to r1 is 172.29.24.0/24
r2 to r5 is 172.29.100.0/29

For r4 to learn 172.29.12.0, I summarize as the following on r2 and
redistribute ospf into rip. I also redistributed connected into rip
Area 12 range 172.29.12.0 255.255.255.0

I do not see the route in r4.

Any ideas?

Thanks.
RAM

• Next message: Malik Javid: "RE: How to Allow only one MAC address and IP Address"
• Previous message: C.Sammarcellino@sirtisistemi.it: "IP Mobile (help need)"
• Maybe in reply to: Ram Shummoogum: "ospf/rip VLSM"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:41 GMT-3