From: MADMAN (dave@interprise.com)
Date: Thu May 08 2003 - 12:14:17 GMT-3
Sounded strange so I tried creating a new VLAN interface of a VLAN
that does not exist. It seems to default to the no shut state though
obviously since the VLAN isn't active the interface is down, down.
I tried both ways, via the VLAN database and simply creating the
interface VLAN in config mode.
Dave
chwarren@cox.net wrote:
> do a 'shut' on int vlan16 first, then try 'no shut' on int vlan3.
>
> Only one active 'management' interface.
>
>
>>From: Tom Young <gitsyoung@yahoo.co.jp>
>>Date: 2003/05/08 Thu AM 03:39:28 EDT
>>To: ccielab@groupstudy.com
>>Subject: no shut the vlan interface
>>
>>hi,group,
>>
>> I added a new vlan 3 into my cat3550XL switch, but I
>>couldn't do no shut for int vlan 3 whatever I had done.
>>The interface of VLAN 3 always int the SHUT status.Why?
>>
>>Thanks alot
>
>
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Government can do something for the people only in proportion as it can do something to the people." -- Thomas Jefferson
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:39 GMT-3