From: Scott Morris (swm@emanon.com)
Date: Thu May 08 2003 - 11:21:44 GMT-3
Authentication mode md5 (level-1|level-2) -- And it's only for
high-end routers!
http://www.cisco.com/en/US/products/sw/iosswrel/ps1612/products_feature_
guide09186a0080080d10.html
Be aware that it is an 'S' train feature at this point, so I don't
believe you'll be seeing this on the exam at all!
For smaller routers, and on the R&S exam, you only have clear text
passwords with area and domain levels.
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
pandoraytchan@hotmail.com
Sent: Monday, May 05, 2003 10:44 PM
To: ccielab@groupstudy.com
Subject: RE: ISL & Dot1q vlan
Do you mean we can use different encapsulation method in one physical
interface?
i.e.
Interface Fastethernet 0/1
Interface fastethernet 0/0.1
encapsulation dot1q 400
interface FastEthernet0/0.2
encapsulation isl 500
-----Original Message-----
Wrom: KVFVWRKJVZCMHVIBGDADRZFSQHYUCDDJBLVLMHAALPTCXLYRW
Sent: Monday, May 05, 2003 7:25 PM
To: Pandora
Subject: Re: ISL & Dot1q vlan
yes you can do that without a hastle .....make the
router support isl on one subinterface if that is the
case and on the other it can offer you dot1q ...be
careful to check the correct version of IOS .
cheers
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo. http://search.yahoo.com
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:38 GMT-3