From: frank.yu@japan.bnpparibas.com
Date: Wed May 07 2003 - 02:32:20 GMT-3
I remember we had this discussion before where comes a conclution that
virtual link authentication has nothing to do with area0 authentication.
Not sure if it is right or not.
Internet
ohiohondo@columbus.rr.com@groupstudy.com - 05/07/2003 12:52 PM
Please respond to ohiohondo@columbus.rr.com
Sent by: nobody@groupstudy.com
To: gitsyoung, ccielab
cc:
Subject: RE: authentication of virtul-link
You have to authenticate. I do not believe you have to use the same level
of
authentication!!!
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of Tom
Young
Sent: Tuesday, May 06, 2003 8:16 PM
To: ccielab@groupstudy.com
Subject: authentication of virtul-link
Somebody said if the area 0 of ospf using authentication,
you have to have the virtul-link also use the same
authentication so that it could come into area 0 , like
the command below
area 5 virtual authentication-key 1 cisco
(for the md5 authentication)
But I tired to use the command withOUT authentication
parameter, it also connected with area 0 ,WHY?
Thanks alot
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:38 GMT-3