From: Dennis Worth (Dennis.Worth@oomc.com)
Date: Tue May 06 2003 - 23:49:32 GMT-3
I just went through this. You'll will probably have to upgrade the boot roms.
-----Original Message-----
From: Jack DeLaGarza [mailto:bluspooky@yahoo.com]
Sent: Monday, May 05, 2003 9:13 AM
To: Jonathan V Hays; ccielab@groupstudy.com
Cc: 'Charles T. Alexander'
Subject: RE: 2501 Boot Flash Problem
I've seen the same thing. It sounds like you are
using a compressed image on flash but don't have
enough dram to load the entire uncompressed image.
Try upgrading your ram from 8 to 16meg.
HTH
--- Jonathan V Hays <jhays@jtan.com> wrote:
> > -----Original Message-----
> > From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On
> > Behalf Of Charles T. Alexander
> > Sent: Sunday, May 04, 2003 2:00 PM
> > To: ccielab@groupstudy.com
> > Subject: 2501 Boot Flash Problem
> >
> >
> > I recently purchased a 2501 with 16/8. I got some
> new flash and
> > installed it but the router does not recognize
> it. It will
> > recognize 2
> > - 4MB though. I took the new memory and put 12.2
> on it in another
> > router. Then put the memory in the 2501. It
> still did not recognize
> > the flash. It proceeded to get a 12.2 which I
> name
> > cisco2-2500 from my
> > TFTP sever. After loading it told me:
> > SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE
> IMAGE!
> >
> > The configuration register is 2102
> >
> > It reading Cisco web site I see that there is such
> a thing a boot prom
> > upgrades. Could this be a problem?
> >
> > I'd appreciate suggestions on how to get this
> puppy working.
> >
> >
>
> The latest 2500 boot prom is 11.0(10c). It could
> also be the flash is
> partitioned and you need to delete it.
> The subject of 2500 boot problems comes up a lot.
> Try the archives for
> more info.
>
> http://www.groupstudy.com/cgi-bin/search
__________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:38 GMT-3