From: Richard Davidson (rich@myhomemail.net)
Date: Mon May 05 2003 - 23:32:42 GMT-3
I think, on the main interface you need frame map clns
command and on the p-p side you need nothing.
--- MkMiara@netscape.net wrote:
> I ran into a problem when configuring ISIS over
> frame-relay. The frame-relay is as follows:
>
> Frame-relay PVC--------Frame-relay
> switch-------Frame-relay point-to-point
> on main interface
> sub-interface (dynamic)
>
> I could not get ISIS to form a peer neighbors
> between the two routers.
> Is it not possible to run ISIS over a dynamic type
> frame-relay interface using interface-dlci???
>
> To work around this I built a GRE tunnel and it
> worked.
>
> Thanks
>
> Mike
>
>
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:37 GMT-3