From: OhioHondo (ohiohondo@columbus.rr.com)
Date: Fri May 02 2003 - 17:59:09 GMT-3
There isn't any difference.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jason Cash
Sent: Friday, May 02, 2003 2:13 PM
To: ccielab@groupstudy.com
Subject: Nat - to pool or not to pool...
Just a little curious as to the NAT solution for Lab 19 IPE:
S0/0 ip add 150.50.5.69/27
The solution is listed as:
ip nat pool backbone2 150.50.5.69 150.50.5.69 netmask 255.255.255.224
ip nat inside source list 2 pool backbone2 overload
!
access-list 2 permit 150.50.4.0 0.0.0.255
I just did this:
ip nat inside source list 80 interface Serial0/0 overload
!
access-list 80 permit 150.50.4.0 0.0.0.255
I don't think there is any difference is there?
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:36 GMT-3