From: Leo Song (lsong@dataphile.ca)
Date: Thu May 01 2003 - 10:15:56 GMT-3
Hi,
I configured dialer profile at Cisco 1700, but the problem is it never
dials while when I change to dial map then it works, anything wrong in
my dialer profile configuration, the debug ip packet show encapsulation
failed error, thanks.
version 12.2
service timestamps debug datetime localtime
service timestamps log datetime localtime
service password-encryption
!
hostname dsltorrt3
!
logging buffered 4096 debugging
enable password 7 08221F1C080A160201
!
username dslvanrt3 password 7 011707105A1B0E062D49
clock timezone EST -5
clock summer-time EST recurring
ip subnet-zero
!
isdn switch-type basic-ni
!
!
!
interface BRI0
bandwidth 128
no ip address
encapsulation ppp
dialer pool-member 10 priority 100
isdn switch-type basic-ni
isdn spid1 xxxxx xx
isdn spid2 xxxxx xx
no cdp enable
ppp authentication chap
interface Dialer10
ip address 10.10.191.1 255.255.255.0
encapsulation ppp
dialer pool 10
dialer remote-name dslvanrt3
dialer string 916046874636
dialer-group 1
no cdp enable
ppp authentication chap
ip classless
!
logging history debugging
logging trap debugging
dialer-list 1 protocol ip permit
no cdp run
snmp-server system-shutdown
!
line con 0
line aux 0
line vty 0 4
password 7 06115C734540070D00
login
escape-character 27
!
Leo
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:35 GMT-3