From: jfaure@sztele.com
Date: Tue Apr 29 2003 - 14:55:10 GMT-3
Hi all:
I'm reading the Halabi book and working with the RR bgp features. These are
the questions I have:
1-Is it possible to have multiple route reflectors in your AS, all these RR
belonging to the same cluster, and distribute some ibgp clients to one RR
and others clients to the other RR? This is, imagine you have 2 RR , all
the ibgp clients pointing to both, but you want that a group of these
clients learn the prefixs from the first RR and the other group from the
second RR. Obviously, you also connect the two RR with a normal ibgp
session.
2-I though that the "bgp cluster-id " command was used to purposes as
above. Anyway, reading the cd doc i understood thay you need to configure
it in the ibgp clients (to identify witch cluster they belong to), but
reading the Halabi it seems this command must be configured in the RRs, no
in the clients. I've seing that you can't add this command if you have
already added the clients in the RR, but you can add it if you remove the
clients first, then add the cluster-id and then add the clients newly. If
this is the way you must use this command, how do you do to assign some
clients to one RR and the others to other RR?
Any help would be apreciated.
Regards and thank you very much for your help
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:09 GMT-3