From: iron_tri (iron_tri@msn.com)
Date: Tue Apr 29 2003 - 00:32:27 GMT-3
As far as I know, the employer will typically ask you for your
certifications with the intent of using them for the company's Channel
Partner certification. So, in essence, I guess you could refuse to allow
your employer to use your certification status, but I don't know for sure
and that will really be up to you to negotiate with them. And, I don't
think it really hurts your status in any way if they use your certification.
It's only a hinderance if you leave one Channel Partner and go to work for
another partner. And, the hinderance is only for the companies to worry
about when you change employers. Cisco will be able to give you the full
story.
Good Luck.
----- Original Message -----
From: "Tony Pang" <tonypang@dmx.com.hk>
To: "iron_tri" <iron_tri@msn.com>; "eric" <namaste@pacbell.net>;
<ccielab@groupstudy.com>
Sent: Monday, April 28, 2003 9:29 PM
Subject: RE: CCIE Number OT
> Hi,
>
> If my employer uses my number, does it need my agreement and will I be
> notified? Can I find the rules in the Cisco web site? Thanks.
>
> Regards,
> Tony
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> iron_tri
> Sent: Tuesday, April 29, 2003 8:25 AM
> To: eric; ccielab@groupstudy.com
> Subject: Re: CCIE Number OT
>
>
> Based upon your question, it sounds like you are working for a Cisco
Channel
> Partner. If that is the case, contact your local CAM (Channel Accounts
> Manager) from Cisco Systems, and ask the CAM if your number is being used
> for Certification purposes by your company. They should be able to
provide
> the answer. If you don't know how to contact the Cisco CAM, I would check
> around your office or simply call the local Cisco office. A couple of
> things to remember, if you aren't normally someone that interfaces with
the
> CAM, make sure that you let the CAM know that you are just trying to find
> out some information regarding your number. You want to be careful if you
> are getting ready to leave the company, if you are trying to keep it
quiet,
> so make sure the CAM just gives you the relevant information and doesn't
> share it with anyone. Two, if your current employer is using your CCIE
for
> certification purposes, then your new employer (if they are also a Cisco
> Channel Partner) cannot use your CCIE certification for a period of six
> months. At least that's what the time frame was about a year ago, and
this
> may have changed within Cisco, but I would check the rules if I were you.
>
> You might also try the Channels SE if you know that person.
>
> Good luck.
>
> HTH
> ----- Original Message -----
> From: "eric" <namaste@pacbell.net>
> To: <ccielab@groupstudy.com>
> Sent: Monday, April 28, 2003 11:03 AM
> Subject: CCIE Number OT
>
>
> > Hey guys,
> > Sorry about the off subject.
> > How do I find out if my number is being used by my present employer If
> > they are using it how do I get it unassociated with them. ( they have
> > more than enough ccie's to get the discount ) any ideas on how to get
> > this info would be greatly appreciated.
> >
> > ~Eric Johnson
> > CCIE #11332
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:09 GMT-3