From: Jonathan V Hays (jhays@jtan.com)
Date: Sun Apr 27 2003 - 21:54:16 GMT-3
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Nishant Sharma (IT)
> Sent: Sunday, April 27, 2003 2:44 PM
> To: ccielab@groupstudy.com
> Subject: Floating static routes not working on cat 4006 (w SUP III)
>
>
> Dear All,
>
> I have configured floating static route on my cat 4006 with
> AD of 2 , see config below - so ideally when ip interface
> 203.92.194.1 goes down , traffic should go out through
> 172.30.0.10 but it is not working. What I might b doing wrong ???
>
> ip route x.14.184.106 255.255.255.255 203.92.194.1
> ip route x.14.184.106 255.255.255.255 172.30.0.10 2
Check your routing table to verify that 172.30.0.10 replaces
203.92.194.1 when the first interface goes down.
Second, verify that the 172.30.0.10 is reachable from the Catalyst 4006.
HTH
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:08 GMT-3