From: Niksa Tomulic (ccie@otokrab.net)
Date: Sat Apr 26 2003 - 10:29:11 GMT-3
dialer load-threshold load [outbound | inbound | either]
load
Interface load used to determine whether to initiate
another call or to drop a link to the destination. This argument
represents a utilization percentage; it is a number between 1 and 255,
where 255 is 100 percent
So, in your case:
Your bandwidth you need to consider is 64000
If you want to bring up the link at 32k load that is 32/64= 50%
50% from 255 (load at 100%) is - 127.5
So your command is
dialer load-threshold 128 either
thanks
niksa
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
OhioHondo
Sent: Saturday, April 26, 2003 1:41 PM
To: folivore; ccielab@groupstudy.com
Subject: RE: Dialer load-threshold question
how about
dialer load-threshold 32 either
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
folivore
Sent: Friday, April 25, 2003 11:05 PM
To: ccielab@groupstudy.com
Subject: Dialer load-threshold question
Hi, Guys:
If a question states: Bring up both B if the traffic exceed 32k on any
direction.
Which one is the correct answer?
dialer load-threshold 64 either
or dialer load-threshold 128 either
I think the second one is correct but nearly all books give me the first
one. Do we need to calculate the load based on 2B?
Thanks
Jim
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:07 GMT-3