From: Mohammad Khan (ahmadwa@yahoo.com)
Date: Thu Apr 24 2003 - 12:53:02 GMT-3
Here is the link to your question:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120limit/120s/120s15/fiarospf.htm
It is not supported on low end routers, alternatively
if you wish you can filter ALL LSA's on the low end
routers by using "ip ospf database-filter all out"
command under interface configuration mode.
A. Khan
--- Ivan <limmti@yahoo.com.sg> wrote:
> Hi All,
>
> Let say:
> r1---area1---r2----area0----r3.
>
> I would like to filter off some of the LSA from its
> OSPF database that r2 send to r1. Is there a way for
> this to be done?
>
> Under the command reference list for OSPF (12.2)
> There is a command "area filter-list". Although this
> command was introduce in ver 12.0.15(s), I cannot
> find
> this in my Cisco 2501 IOS ver 12.2.1d.
>
> Any advice is appreciated.
>
> Thanks
> Ivan
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Promote your business from just $5 a month!
> http://sg.biztools.yahoo.com
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:05 GMT-3