From: Danny.Andaluz@triaton-na.com
Date: Thu Apr 24 2003 - 10:32:20 GMT-3
Here's my config. Another person posted here that it worked for him the
same.
sh run
Building configuration...
Current configuration : 925 bytes
!
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r567
interface Loopback0
ip address 1.1.1.1 255.255.255.0
!
interface Serial0
no ip address
shutdown
!
interface Serial1
ip address 2.2.2.2 255.255.255.0
!
interface FastEthernet0
ip address 3.3.3.3 255.255.255.0
speed auto
!
router ospf 1
log-adjacency-changes
area 0 authentication message-digest
area 89 virtual-link 99.99.99.99
network 2.2.2.0 0.0.0.255 area 89
network 3.3.3.0 0.0.0.255 area 45
!
ip classless
no ip http server
!
!
line con 0
line aux 0
line vty 0 4
login
!
end
-----Original Message-----
From: Daniel Free [mailto:danrose111@earthlink.net]
Sent: Thursday, April 24, 2003 3:38 AM
To: Teck PhrEAk!!; Andaluz, Danilo, Triaton/NA; ccielab@groupstudy.com
Subject: Re: ospf question
Hi,
Sorry to have to disagree but you need to configure the password on the
virtual link in your sample scenario. Check ip ospf virtual and see if the
adjacency is full. Probably not. Check the below link. Thanks. Best of luck.
Danny
http://www.cisco.com/warp/public/104/27.html
----- Original Message -----
From: "Teck PhrEAk!!" <phreakinphunk@hotmail.com>
To: <Danny.Andaluz@triaton-na.com>; <ccielab@groupstudy.com>
Sent: Thursday, April 24, 2003 2:24 AM
Subject: Re: ospf question
> Hi Danny,
>
> Yes, creating a virtual-link is like extending the boundary of area
> 0.....the implementation of a virtual-link requires area 0
> authentication
on
> the other side of the virtual-link , the one which does not have any
> interfaces in area 0.
>
> also b'coz you are creating a virtual-link......and no actual
> interfaces
are
> involved in creating a virtual-link you dont require interface
> authentication.
>
> cheers,
>
> sumit.
>
>
>
>
> >From: Danny.Andaluz@triaton-na.com
> >Reply-To: Danny.Andaluz@triaton-na.com
> >To: ccielab@groupstudy.com
> >Subject: ospf question
> >Date: Thu, 24 Apr 2003 00:44:13 -0400
> >
> >router ospf 1000
> > log-adjacency-changes
> > area 0 authentication message-digest
> > area 6 virtual-link x.x.x.x
> > network x.x.x.x 0.0.0.255 area 6
> > network x.x.x.x 0.0.0.255 area 10
> >
> >Hello,
> >
> >This router has a virtual link to area 0 through area 6. Area 0 is
> >doing authentication. I could not get the routes on the this router
> >into the rest of the ospf network unless I added the "area 0
> >authentication message-digest" on this router. This is very strange
> >since this router does
> >not have any interfaces in area 0. Unless the virtual link is like an
> >interface in Area 0. Also, I did not have to add the password anywhere
on
> >the router. Strange. It's almost like half authentication. Can
> >someone explain this?
> >
> >TIA,
> >Danny
>
>
> _________________________________________________________________
> STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
> http://join.msn.com/?page=features/junkmail
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:05 GMT-3