From: Jason Cash (cash2001@swbell.net)
Date: Wed Apr 23 2003 - 16:43:12 GMT-3
> hostname r6
> !
> aaa new-model
> aaa authentication login default local
> aaa authorization exec default local
> !
> username brett privilege 8 password 0 favre
> !
> privilege configure level 8 interface
> privilege exec level 8 configure
> privilege exec level 8 configure terminal
> !
> end
>
> And here is the capture of the login:
>
> User Access Verification
>
> Username: brett
> Password:
>
> r6>conf t
^^^
>Notice that this login is not enabled. You don't have the "#" sign.
>
>Is the line (vty or console) from which the connection is made
configured
>in line mode with "login local" ?
>
>It should be. I suggest you practice this type of thing on VTYs
instead
>of console or you might get some extra practice with password recovery.
That option is not available for me. All I get is:
r1(config-line)#login ?
authentication Authentication parameters.
r1(config-line)#login authentication default ?
<cr>
Then it doesn't show in the config. I guess that is the default being
that ' aaa authentication login default local ' is defined. I cannot
get a priviledge prompt for the life of me! Can you show me you config
of it working?
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:03 GMT-3