From: Aidan Marks (amarks@cisco.com)
Date: Tue Apr 22 2003 - 20:14:00 GMT-3
3550 NAT is currently not on the roadmap.
Aidan
At 11:59 PM 22/04/2003, Copleston Daniel wrote:
>The 3550 does not currently support NAT (I found this when I tried to
>configure it but this is also stated in the following
>http://www.cisco.com/en/US/customer/tech/tk648/tk361/technologies_tech_note0
>9186a008011c629.shtml)
>
>Does anyone who may have investigated this limitation in the past know if
>Cisco have any plans to provide NAT as a feature (perhaps when 12.2 for the
>3550 is released?) or if hardware limitations on the 3550 render NAT
>impossible.
>
>Thanks,
>Daniel
>
>
>************************************************************************
>The contents of this message and any attachments are confidential and
>are intended solely for the attention and use of the addressee only.
>Information contained in this message may be subject to legal,
>professional or other privilege or may otherwise be protected by other
>legal rules. This message should not be copied or forwarded to any other
>person without the express permission of the sender. If you are not the
>intended recipient you are not authorised to disclose, copy, distribute
>or retain this message or any part of it.
>
>If you have received this message in error, please notify the sender by
>telephone (+44-20-7002-4000) and destroy the original message.
>
>We reserve the right to monitor all e-mail messages passing through our
>network.
>************************************************************************
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:36:02 GMT-3