Re: LLQ - can't verify

From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Mon Apr 21 2003 - 03:32:18 GMT-3


I thought you can do it on the Main interface, but need to disable frame-relay traffic-shapping ?

http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a008009489a.shtml#choosingwheretoapplyaservicepolicy

Donny

                                                                                                                                       
                      "Vijay S
                      Jayaraman" To: "Jason Cash" <cash2001@swbell.net>
                      <vjayaram@in.ibm. cc: ccielab@groupstudy.com, nobody@groupstudy.com
                      com> Subject: Re: LLQ - can't verify
                      Sent by:
                      nobody@groupstudy
                      .com
                                                                                                                                       
                                                                                                                                       
                      21-04-2003 13:22
                      Please respond to
                      "Vijay S
                      Jayaraman"
                                                                                                                                       
                                                                                                                                       

Jason,
you would need to use subinterfaces per PVC and then define the queuing per
PVC.....also enable traffic shaping.....
The main interface supports only PIPQ and FIFO......

Regards,
Vijay.

                      "Jason Cash"
                      <cash2001@swbell. To: <ccielab@groupstudy.com>
                      net> cc:
                      Sent by: Subject: LLQ - can't verify
                      nobody@groupstudy
                      .com

                      04/21/2003 08:29
                      AM
                      Please respond to
                      "Jason Cash"

I am trying to confirm the LLQ config and keep getting this error:

r5#sh queue serial 0
Show queue not supported with FIFO queueing

The config is just like the solution of IPE Section 12 so why can I not
verify the queue?

hostname r5
!
logging buffered notifications
!
!
class-map data
  match access-group 106
class-map voice
  match access-group 105
!
!
policy-map voice
  class voice
    priority 80
  class data
    priority 48
!
ip subnet-zero
no ip domain-lookup
!
interface Loopback0
 ip address 200.0.0.5 255.255.255.255
!
interface Ethernet0
 ip address 150.50.7.5 255.255.255.128
!
interface Serial0
 ip address 150.50.100.5 255.255.255.224
 encapsulation frame-relay
 no ip mroute-cache
 service-policy output voice
 frame-relay traffic-shaping
 frame-relay class voice
 frame-relay map ip 150.50.100.2 501 broadcast rtp header-compression
active connections 256
 frame-relay map ip 150.50.100.5 501
 frame-relay map ip 150.50.100.6 501 broadcast
 no frame-relay inverse-arp
!
interface Serial1
 no ip address
 shutdown
!
router eigrp 1
 network 0.0.0.0
 no auto-summary
 no eigrp log-neighbor-changes
!
map-class frame-relay voice
 frame-relay cir 128000
 frame-relay bc 300
 no frame-relay adaptive-shaping
access-list 105 permit ip any any precedence critical
access-list 106 permit ip any any
!
 end

This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer,
to buy or sell any banking or financial instruments or services
and no representation or warranty is given in respect of its
accuracy, completeness or fairness. The material is subject
to change without notice. You should take your own independent
tax, legal and other professional advice in respect of the content
of this message. This message may contain confidential or
legally privileged material and may not be copied, redistributed
or published (in whole or in part) without our prior written consent.
This email may have been intercepted, partially destroyed,
arrive late, incomplete or contain viruses and no liability is
accepted by any member of the Credit Agricole Indosuez group
as a result. If you are not the intended recipient of this message,
please immediately notify the sender and delete this message
from your computer.



This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:59 GMT-3