From: Andrey Rassiysky (andrey.rassiysky@btc-net.bg)
Date: Mon Apr 21 2003 - 02:51:28 GMT-3
Try: sh policy-map interface s0
br,
Andrey
Jason Cash wrote:
>I am trying to confirm the LLQ config and keep getting this error:
>
>r5#sh queue serial 0
>Show queue not supported with FIFO queueing
>
>The config is just like the solution of IPE Section 12 so why can I not
>verify the queue?
>
>hostname r5
>!
>logging buffered notifications
>!
>!
>class-map data
> match access-group 106
>class-map voice
> match access-group 105
>!
>!
>policy-map voice
> class voice
> priority 80
> class data
> priority 48
>!
>ip subnet-zero
>no ip domain-lookup
>!
>interface Loopback0
> ip address 200.0.0.5 255.255.255.255
>!
>interface Ethernet0
> ip address 150.50.7.5 255.255.255.128
>!
>interface Serial0
> ip address 150.50.100.5 255.255.255.224
> encapsulation frame-relay
> no ip mroute-cache
> service-policy output voice
> frame-relay traffic-shaping
> frame-relay class voice
> frame-relay map ip 150.50.100.2 501 broadcast rtp header-compression
>active connections 256
> frame-relay map ip 150.50.100.5 501
> frame-relay map ip 150.50.100.6 501 broadcast
> no frame-relay inverse-arp
>!
>interface Serial1
> no ip address
> shutdown
>!
>router eigrp 1
> network 0.0.0.0
> no auto-summary
> no eigrp log-neighbor-changes
>!
>map-class frame-relay voice
> frame-relay cir 128000
> frame-relay bc 300
> no frame-relay adaptive-shaping
>access-list 105 permit ip any any precedence critical
>access-list 106 permit ip any any
>!
>end
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:59 GMT-3