From: midaskim (janggulove@hanmail.net)
Date: Sun Apr 20 2003 - 12:15:58 GMT-3
I'm working about "ip accounting-trasits".
--s0.1<R5>s0.2-----<R6>
In this topology,
I'm testing that R5 will record the amount of traffic through R5 to R6.
It is supporting up to 300 records.
I configured "ip accounting-trasits 300" in global cofiguration mode, and
"ip accounting out-packets" in S0.2 interface configuration mode.
But. After configuring, there is no "ip accounting-trasits 300" in
running-configuration.
What is my mistake ??
My configuration is right about testing ????
<My config>
r5(config)#ip accounting-transits 300
r5(config)#int s0.2
r5(config-subif)#ip accounting output-packets
r5(config-subif)#
r5#sh ru
Building configuration...
Current configuration : 864 bytes
!
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r5
!
logging rate-limit console 10 except errors
!
ip subnet-zero
no ip finger
!
cns event-service server
!
interface Ethernet0
ip address 10.1.5.1 255.255.255.0
!
interface Serial0
no ip address
encapsulation frame-relay
!
interface Serial0.1 multipoint
ip address 10.1.35.2 255.255.255.0
frame-relay map ip 10.1.35.1 153 broadcast
!
interface Serial0.2 multipoint
ip address 10.1.56.1 255.255.255.0
ip accounting output-packets
frame-relay map ip 10.1.56.2 156 broadcast
[IMAGE]
[IMAGE]
[IMAGE]
midaskim
[IMAGE]
[IMAGE]
"?l8. @NEM3], Daum" http://www.daum.net !:Fr;}>24B 9+7a GQ8^@O3]!;
[IMAGE]
GA8.9L>v 8^@O =a:8<L>n?d?
60!Av =:E2+?k7.H.@e+%a 3*88@G 8BCc 8^@O!
[IMAGE]
[IMAGE]
GQ8^@O3] =:FTA&7N =C=:E[
=:FT >x4B FmAvGT! GQ8^@O3] FmAvGT!
[IMAGE]
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:59 GMT-3