From: Jason Cash (cash2001@swbell.net)
Date: Thu Apr 17 2003 - 10:33:30 GMT-3
I just ran into this problem. If the route is connected to a switch,
make sure that portfast is enabled to bypass the listening/learning
phase of STP.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Emad
Sent: Thursday, April 17, 2003 1:10 AM
To: CCIE LAB (E-mail)
Subject: Boot from tftp server
Dear all,
I think I made before but now it is not working , I have flash with 8 MB
memory and I want to run IOS needs 16 MB flash , therefore I tried to
boot from a TFTP server having this new IOS . I'm using cisco2501 , I
tried to boot from tftp server by configuring it from ROMMON mode by CLI
command which is B [file name] [tftp server ip address] , am I right or
it is possible to boot from tftp server an IOS which need more flash
than I have? Please advice Thanx
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:56 GMT-3