From: Teck PhrEAk!! (phreakinphunk@hotmail.com)
Date: Thu Apr 17 2003 - 11:22:38 GMT-3
Robert,
try this.....delete VLAN.dat on the 3550 and reboot.Not sure if the 2950
also has a VLAN.dat....if it does delete that too....
erasing the config is not enuff for the 3550...some vtp and vlan info is
also stored in the VLAN.dat.....gotta delete that too...
lemme know if it worked......
cheers,
sumit.
>From: "Charles Church" <cchurch@wamnet.com>
>Reply-To: "Charles Church" <cchurch@wamnet.com>
>To: "Robert Yee" <robert@bluespud.com>, <ccielab@groupstudy.com>
>Subject: RE: VTP updates are received but ignored?
>Date: Thu, 17 Apr 2003 08:14:04 -0400
>
>Robert,
>
> Are there any passwords defined for the domain? Are you using the same
>trunking protocol at both ends (not sure if either supports ISL anymore).
>Is the version number higher on the 3550? Otherwise, the client will
>ignore
>it, I believe.
>
>Chuck Church
>CCIE #8776, MCNE, MCSE
>Wam!Net Government Services
>13665 Dulles Technology Dr. Ste 250
>Herndon, VA 20171
>Office: 703-480-2569
>Cell: 585-233-2706
>cchurch@wamnet.com
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>Robert Yee
>Sent: Thursday, April 17, 2003 12:55 AM
>To: ccielab@groupstudy.com
>Subject: VTP updates are received but ignored?
>
>
>Hi All,
>
>I have 2 switches a 3550 and a 2950 that is trunked & ether-channeled
>accross fa0/23 and fa0/24.
>
>The 3550 is the server and the 2950 is the slave. The vtp domain names are
>identical.
>
>If I run 'show vtp counter', it shows that the client is receiving updates.
>However, the VLANs that I add to the server is not getting sent accross to
>the client.
>
>I have manamagent addresses on both switches in VLAN 1.
>
>I have probably done this 50 times in production environments with no
>problems previously, and now I can't get it to work in a lab?
>
>The 'show vtp counter' indicates there are some errors:
>
>2950#sh vtp count
>VTP statistics:
>Summary advertisements received : 6
>Subset advertisements received : 4
>Request advertisements received : 0
>Summary advertisements transmitted : 0
>Subset advertisements transmitted : 0
>Request advertisements transmitted : 4
>Number of config revision errors : 0
>Number of config digest errors : 4
>Number of V1 summary errors : 0
>
>
>VTP pruning statistics:
>
>Trunk Join Transmitted Join Received Summary advts received
>from
> non-pruning-capable
>device
>---------------- ---------------- ----------------
>-------------------------
>--
>Po1 0 0 0
>
>Any ideas as to what I may be missing?
>
>Thanks,
>
>Robert
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:56 GMT-3