From: John Mistichelli (jmistichelli@yahoo.com)
Date: Thu Apr 17 2003 - 09:56:29 GMT-3
You will need to issue the following command:
First:
interface cable-modem0
no cable-modem compliant bridge
Next:
- enable IP routing
- remove all bridge-group statements
- configure it as a router
Makes a cost effective VoIP box.
Hope that helps.
John
7536
_______________________
http://www.routopia.com
Your source for remote CCIE equipment rental. We have
ATM, ISDN, Catalyst 3550, lab scenarios and more. All
at a low low rental price. No source will give you a
more comprehensive solution at such a low price.
Guaranteed!
--- Brian Dennis <brian@labforge.com> wrote:
> Try administratively shutting down the cable-modem
> interface. Also be
> sure to add the "cable-modem voip clock-internal"
> command to the
> cable-modem interface to get dial tone on the FXS
> ports.
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> Director of CCIE Training and Development -
> IPexpert, Inc.
> Mailto: brian@ipexpert.net
> Toll Free: 866.225.8064
> Outside U.S. & Canada: 312.321.6924
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Larry H
> Sent: Friday, April 11, 2003 5:34 PM
> To: ccielab@groupstudy.com
> Subject: uBR924 Looses IP address
>
> Hello Group:
> Has anyone had any problems with uBR924 routers
> loosing their E0 IP
> Address?
> I am running V 12.1(5)T14 of IOS.
>
> Thanks for any advice.
>
> Larry H.
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:55 GMT-3