From: Hunt Lee (huntl@webcentral.com.au)
Date: Thu Apr 17 2003 - 03:21:46 GMT-3
Are they both in the same "VTP domain"?
Hunt
-----Original Message-----
From: Robert Yee [mailto:robert@bluespud.com]
Sent: Thursday, 17 April 2003 2:55 PM
To: ccielab@groupstudy.com
Subject: VTP updates are received but ignored?
Hi All,
I have 2 switches a 3550 and a 2950 that is trunked & ether-channeled
accross fa0/23 and fa0/24.
The 3550 is the server and the 2950 is the slave. The vtp domain names are
identical.
If I run 'show vtp counter', it shows that the client is receiving updates.
However, the VLANs that I add to the server is not getting sent accross to
the client.
I have manamagent addresses on both switches in VLAN 1.
I have probably done this 50 times in production environments with no
problems previously, and now I can't get it to work in a lab?
The 'show vtp counter' indicates there are some errors:
2950#sh vtp count
VTP statistics:
Summary advertisements received : 6
Subset advertisements received : 4
Request advertisements received : 0
Summary advertisements transmitted : 0
Subset advertisements transmitted : 0
Request advertisements transmitted : 4
Number of config revision errors : 0
Number of config digest errors : 4
Number of V1 summary errors : 0
VTP pruning statistics:
Trunk Join Transmitted Join Received Summary advts received
from
non-pruning-capable
device
---------------- ---------------- ----------------
---------------------------
Po1 0 0 0
Any ideas as to what I may be missing?
Thanks,
Robert
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:55 GMT-3