From: jfaure@sztele.com
Date: Thu Apr 17 2003 - 07:09:11 GMT-3
Hi:
Check the MD5 id of each switch with "sh vtp stat". Probably isn't the
same. I've had this problem several months ago. Check this link, where the
problem is described and you cand find how to do to solve it.
http://www.cisco.com/warp/public/473/21.html#ts_vtp_cfg_rev
Regards
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
Hunt Lee
<huntl@webcentr Para: "'Robert Yee'"
al.com.au> <robert@bluespud.com>
Enviado por: cc: "'ccielab@groupstudy.com'"
nobody@groupstu <ccielab@groupstudy.com>
dy.com Asunto: RE: VTP updates are received but
ignored?
17/04/03 08:21
Por favor,
responda a Hunt
Lee
Are they both in the same "VTP domain"?
Hunt
-----Original Message-----
From: Robert Yee [mailto:robert@bluespud.com]
Sent: Thursday, 17 April 2003 2:55 PM
To: ccielab@groupstudy.com
Subject: VTP updates are received but ignored?
Hi All,
I have 2 switches a 3550 and a 2950 that is trunked & ether-channeled
accross fa0/23 and fa0/24.
The 3550 is the server and the 2950 is the slave. The vtp domain names are
identical.
If I run 'show vtp counter', it shows that the client is receiving updates.
However, the VLANs that I add to the server is not getting sent accross to
the client.
I have manamagent addresses on both switches in VLAN 1.
I have probably done this 50 times in production environments with no
problems previously, and now I can't get it to work in a lab?
The 'show vtp counter' indicates there are some errors:
2950#sh vtp count
VTP statistics:
Summary advertisements received : 6
Subset advertisements received : 4
Request advertisements received : 0
Summary advertisements transmitted : 0
Subset advertisements transmitted : 0
Request advertisements transmitted : 4
Number of config revision errors : 0
Number of config digest errors : 4
Number of V1 summary errors : 0
VTP pruning statistics:
Trunk Join Transmitted Join Received Summary advts received
from
non-pruning-capable
device
---------------- ---------------- ----------------
---------------------------
Po1 0 0 0
Any ideas as to what I may be missing?
Thanks,
Robert
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:55 GMT-3