From: Joe Chang (changjoe@earthlink.net)
Date: Tue Apr 15 2003 - 14:04:40 GMT-3
1) Yes, on FR you have to enable rsvp on both main and sub interfaces.
2) I'm not sure, but I don't think you need to exlicitly configure WFQ in
such a scenario.
The docs say: "When both RSVP and CBWFQ are configured for an interface,
RSVP and CBWFQ act independently, exhibiting the same behavior that they
would if each were running alone."
How RSVP and CBWFQ traffic is chosen over one or the other when the
interface transmit ring is ready to send, I'm not sure. I'm having trouble
finding information on this. Anyone out there can shed some light?
----- Original Message -----
From: "bobby" <bobby1@ctimail3.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, April 15, 2003 4:15 AM
Subject: Reg: RSVP & CBWFQ
> Hi,
>
> If I have to enable rsvp on a frame relay sub interface, do I have to
enable
> the same on the main interface also.
>
> Along with the above requirement if i have to enable CBWFQ on the main
> interface how do I enable fair queue to work along with rsvp.
>
> Tks
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:53 GMT-3