From: Anesh Singh (A) (SinghA1@telkom.co.za)
Date: Fri Apr 11 2003 - 02:34:06 GMT-3
Hi Group
Need help with the BGP2RIP redituribution. I have the following
senario:
RIPv2
R2-s0/0---------------serial---------------------s0-R1
|
|
ATM (IBGP)
|
R3 (Route Reflector)
|
|
serial (IBGP)
|
| ebgp
ospf
R4-----------------------serial----------------------R5---------------
--seiral-------------------R6
Between R1 and R2 running Ripv2. Between R2, R3, R4 we are running
IBGP(no routing protocol). Between R4 &R5 running EBGP(no routingh
protocol). Between R5 & R6, running OSPF.
Problem: on R2 we can see the BGP routes on the BGP table, but we
cannot see them on the ip routing table.Due to this we cannot see the
routes on R1. The redistribution between the BGP to Rip does not work.
this is the configs on my routers for R1 & R2:
R1
!
int s0
ip add 10.10.20.1 255.255.255.0
clock rate 64000
!
router rip
network 10.0.0.0
version 2
!
==================================================
R2
int s0/0
ip address 10.10.20.2 255.255.255.0
!
int atm3/0
ip address 10.10.10.9 255.255.255.0
!
router bgp 5
no synchronization
bgp redistribute-internal
bgp log-neighbor-changes
redistribute connected
redistribute rip metric 5
neighbor 10.10.10.10 remote-as 1
no auto-summary
!
router rip
network 10.0.0.0
version 2
passive interface-default
no passive interface s0
redistribute connected
redistribute bgp 5 metric 3
!
Can anyone please help.
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:51 GMT-3