From: mark.r.thomas (mark.r.thomas@telstra.com)
Date: Tue Apr 08 2003 - 20:27:41 GMT-3
I read this as not having the limitation of only configuring R4
So I used an AS filter on both routers in AS34 outbound
-----Original Message-----
From: pita40 [mailto:pita40@hotmail.com]
Sent: Wednesday, 9 April 2003 6:25 AM
To: ccielab@groupstudy.com
Subject: cyscoexpert sample lab 2.0
Section G.4
2) Route learned from the cloud which has traversed AS 1000 should not
be advertised beyond AS 34.
If this question is going to be solved on R4 you have got to use the
following
r4
neighbor 170.1.1.254 send-community
neighbor 170.1.1.254 route-map metric1 in
ip as-path access-list 44 permit _1000_
route-map comm1 permit 10
match as-path 44
set community no-export
!
route-map comm1 permit 20
THis approach does not solve the problem.
The only way that worked is to configure this on the ipcloud router.
Does send-community support "route-map in"
Any thoughts
----------------
Powered by telstra.com
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:49 GMT-3