From: Brian Sims (BSims_1@msn.com)
Date: Tue Apr 08 2003 - 22:13:58 GMT-3
There is a CallManager and Cisco Unity server. The VG200 is a H323 gateway
at every location.
----- Original Message -----
From: "boby2kusa" <boby2kusa@hotmail.com>
To: "Brian Sims" <BSims_1@msn.com>; <ccielab@groupstudy.com>
Sent: Tuesday, April 08, 2003 11:35 AM
Subject: Re: IP Telephony Caller-ID problems
> Not enough information. is there a call manager? Is vg200 a H.323 or
MGCP
> gateway?
> ----- Original Message -----
> From: "Brian Sims" <BSims_1@msn.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, April 07, 2003 6:44 PM
> Subject: IP Telephony Caller-ID problems
>
>
> > Hi,
> >
> > I have the daily duties of implementing voice networks of about 40
phones
> per
> > install. I am using a VG200 for the voice gateway. I have enabled
> caller-id
> > on my voice ports and the local telephone carrier is sending caller-id
> across
> > their analog line but I'm still not getting any caller information from
an
> > outside caller. Anybody have any ideas? I have attached a copy of the
> VG200
> > configs to this email. Thanks in advance.
> >
> > Brian
> >
> > version 12.1
> > no service single-slot-reload-enable
> > no service pad
> > service timestamps debug datetime msec localtime
> > service timestamps log datetime msec localtime
> > !
> > hostname Flowers-ES-vg200
> > !
> > logging rate-limit console 10 except errors
> > no logging console
> > enable secret 5 $1$72BH$38oMBaKLMFhiNS2l6PEbW/
> > !
> > ip subnet-zero
> > no ip finger
> > !
> > no mgcp timer receive-rtcp
> > call rsvp-sync
> > !
> > !
> > interface FastEthernet0/0
> > ip address 10.195.0.10 255.255.0.0
> > no ip route-cache
> > no ip mroute-cache
> > duplex auto
> > speed auto
> > !
> > ip default-gateway 10.195.0.1
> > ip classless
> > ip route 0.0.0.0 0.0.0.0 10.195.0.1
> > no ip http server
> > !
> > voice-port 1/0/0
> > !
> > voice-port 1/0/1
> > !
> > voice-port 1/1/0
> > connection plar 25002
> > description 260-1015
> > caller-id enable
> > !
> > voice-port 1/1/1
> > connection plar 25002
> > description 260-1047
> > caller-id enable
> > !
> > dial-peer voice 1 pots
> > destination-pattern 9T
> > port 1/1/0
> > !
> > dial-peer voice 2 pots
> > destination-pattern 9T
> > port 1/1/1
> > !
> > dial-peer voice 100 voip
> > destination-pattern 250..
> > session target ipv4:10.5.0.11
> > dtmf-relay h245-alphanumeric
> > codec g711ulaw
> > no vad
> > !
> > line con 0
> > !
> > line aux 0
> > line vty 0 4
> > login
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:49 GMT-3