From: Larry Roberts (larryr@netbeam.net)
Date: Tue Apr 08 2003 - 19:47:15 GMT-3
Group,
I remember reading something about Caller ID not being supported on the
regular FXO cards and that you needed the FXO-M1 version with battery
reversal. I think that might be the problem here. Can anyone confirm if this
is true or not?
Thanks,
Larry Roberts
CCIE #7886 (R&S / Security)
----- Original Message -----
From: "Tim Fletcher" <tim@fletchmail.net>
To: "Brian Sims" <BSims_1@msn.com>; <ccielab@groupstudy.com>
Sent: Tuesday, April 08, 2003 7:32 AM
Subject: Re: IP Telephony Caller-ID problems
> Brian,
>
> Try "caller-id alerting ring 2". If that doesn't work try setting it to 3.
> If it does work, and you want an explanation let me know.
>
> -Tim Fletcher #11406
>
> At 08:44 PM 4/7/2003 -0500, Brian Sims wrote:
> >Hi,
> >
> >I have the daily duties of implementing voice networks of about 40 phones
per
> >install. I am using a VG200 for the voice gateway. I have enabled
caller-id
> >on my voice ports and the local telephone carrier is sending caller-id
across
> >their analog line but I'm still not getting any caller information from
an
> >outside caller. Anybody have any ideas? I have attached a copy of the
VG200
> >configs to this email. Thanks in advance.
> >
> >Brian
> >
> >version 12.1
> >no service single-slot-reload-enable
> >no service pad
> >service timestamps debug datetime msec localtime
> >service timestamps log datetime msec localtime
> >!
> >hostname Flowers-ES-vg200
> >!
> >logging rate-limit console 10 except errors
> >no logging console
> >enable secret 5 $1$72BH$38oMBaKLMFhiNS2l6PEbW/
> >!
> >ip subnet-zero
> >no ip finger
> >!
> >no mgcp timer receive-rtcp
> >call rsvp-sync
> >!
> >!
> >interface FastEthernet0/0
> > ip address 10.195.0.10 255.255.0.0
> > no ip route-cache
> > no ip mroute-cache
> > duplex auto
> > speed auto
> >!
> >ip default-gateway 10.195.0.1
> >ip classless
> >ip route 0.0.0.0 0.0.0.0 10.195.0.1
> >no ip http server
> >!
> >voice-port 1/0/0
> >!
> >voice-port 1/0/1
> >!
> >voice-port 1/1/0
> > connection plar 25002
> > description 260-1015
> > caller-id enable
> >!
> >voice-port 1/1/1
> > connection plar 25002
> > description 260-1047
> > caller-id enable
> >!
> >dial-peer voice 1 pots
> > destination-pattern 9T
> > port 1/1/0
> >!
> >dial-peer voice 2 pots
> > destination-pattern 9T
> > port 1/1/1
> >!
> >dial-peer voice 100 voip
> > destination-pattern 250..
> > session target ipv4:10.5.0.11
> > dtmf-relay h245-alphanumeric
> > codec g711ulaw
> > no vad
> >!
> >line con 0
> >!
> >line aux 0
> >line vty 0 4
> > login
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:49 GMT-3