From: TV (tveillette@myeastern.com)
Date: Tue Apr 08 2003 - 08:48:24 GMT-3
Jason,
I recently implemented in production and as I recall
minimum version is 12.1.
-TV
----- Original Message -----
From: "Jason Wydra" <jasonwydra@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, April 08, 2003 2:11 AM
Subject: Time-Range option for ACL missing
> Here is my IOS:
>
> IOS (tm) C2600 Software (C2600-JS-M), Version 12.0(9), RELEASE SOFTWARE
(fc1)
>
> I'm rrying to impliment a time-range for my ACL. The time-range option is
nowhere to be found. I should be able to input it after the following config
below. Has anyone seen this? I can't find a bug on CCO.
>
> Thanks,
>
> r8(config)#access-list 101 permit tcp any any eq 23 time-range ?
>
^
> % Invalid input detected at '^' marker.
>
>
> r8(config)#access-list 101 permit tcp any any eq 23 ?
> ack Match on the ACK bit
> eq Match only packets on a given port number
> established Match established connections
> fin Match on the FIN bit
> gt Match only packets with a greater port number
> log Log matches against this entry
> log-input Log matches against this entry, including input interface
> lt Match only packets with a lower port number
> neq Match only packets not on a given port number
> precedence Match packets with given precedence value
> psh Match on the PSH bit
> range Match only packets in the range of port numbers
> rst Match on the RST bit
> syn Match on the SYN bit
> tos Match packets with given TOS value
> urg Match on the URG bit
> <cr>
>
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Tax Center - File online, calculators, forms, and more
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:49 GMT-3