From: Rick (ccie_2003@hotmail.com)
Date: Sun Apr 06 2003 - 19:58:04 GMT-3
Can anyone please explain why the below FRTS config killed OSPF? After I
applied the traffic shapping commands the ospf neighbor exchange was hung.
After I removed the below commands OSPF came right up
Also, where on the DOC CD besides the WAN networking guide for Frame-relay can
I find some good FRTS information? Does anyone have any good personal notes on
FRTS?
Thanks,
Rick
r4#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
200.0.0.2 1 EXCHANGE/ - 00:00:31 150.50.24.2 Serial0/0
r4(config)#int s0/0
r4(config-if)#no frame-relay class voip
r4(config-if)#no frame-relay traffic-shaping
r4(config-if)#end
r4#
r4#
r4#
r4#
02:52:42: %OSPF-5-ADJCHG: Process 1, Nbr 200.0.0.2 on Serial0/0 from LOADING
to FULL, Loading Done
Here is the config below.
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r4
!
logging queue-limit 100
!
ip subnet-zero
!
!
ip tcp synwait-time 5
no ip domain-lookup
!
ip audit notify log
ip audit po max-events 100
!
call rsvp-sync
!
!
!
!
!
!
!
!
interface Loopback0
ip address 200.0.0.4 255.255.255.255
!
interface Ethernet0/0
ip address 10.1.1.4 255.255.255.0
shutdown
half-duplex
!
interface Serial0/0
ip address 150.50.24.4 255.255.255.0
encapsulation frame-relay
ip ospf network point-to-point
frame-relay class voip
frame-relay traffic-shaping
frame-relay map ip 150.50.24.2 401 broadcast
frame-relay map ip 150.50.24.4 401
frame-relay lmi-type ansi
!
interface Ethernet0/1
ip address 10.1.1.4 255.255.255.0
half-duplex
!
interface Serial0/1
ip address 150.50.24.4 255.255.255.0
encapsulation frame-relay
frame-relay map ip 150.50.24.2 401 broadcast
frame-relay map ip 150.50.24.4 401
frame-relay lmi-type cisco
!
router ospf 1
log-adjacency-changes
redistribute connected subnets
network 150.50.24.0 0.0.0.255 area 1
!
ip classless
ip http server
!
!
map-class frame-relay voip
frame-relay cir 64000
frame-relay bc 640
frame-relay mincir 64000
no frame-relay adaptive-shaping
frame-relay fair-queue
frame-relay fragment 80
!
!
dial-peer cor custom
!
!
!
!
alias exec srb sh run | begin
alias exec sri sh run | include
!
line con 0
exec-timeout 0 0
password cisco
logging synchronous
line aux 0
exec-timeout 0 0
logging synchronous
Thanks,
Rick
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:47 GMT-3