Re: can not show specific route in BGP

From: Paul Lalonde (plalonde2@cogeco.ca)
Date: Tue Apr 01 2003 - 23:20:34 GMT-3


This is a stretch, but what about:

show ip bgp ipv4 unicast x.x.x.x ?

Paul

----- Original Message -----
From: "Connie Nie" <CNie@EPLUS.com>
To: <ccie1@hotmail.com>; <ccielab@groupstudy.com>
Sent: Tuesday, April 01, 2003 8:28 PM
Subject: RE: can not show specific route in BGP

> BGP is configured and fully functioning. Show ip bgp will show the routes,
> but to see more details, I need to be able to type in the specific ip
> prefix, but somehow I couldn't do that on a few routers.
>
> Connie
>
> -----Original Message-----
> From: ccie1@hotmail.com [mailto:ccie1@hotmail.com]
> Sent: Tuesday, April 01, 2003 1:09 AM
> To: Connie Nie; ccielab@groupstudy.com
> Subject: Re: can not show specific route in BGP
>
> connie:
> do you have BGP configured when typing the command? Are your neighbor
> relationships up? if not try that first then look at the command.
>
> ----- Original Message -----
> From: "Connie Nie" <CNie@EPLUS.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, April 01, 2003 1:03 PM
> Subject: can not show specific route in BGP
>
>
> > Hi, there!
> >
> > I hope some of you might have seen this before---this is driving me
> > absolutely insane. I can't seem to do a "show ip bgp a.b.c.d" on some of
> my
> > routers. They are running 12.1(18), and 12.1(14). On most other routers
> > which are running exact same version of IOS, it works fine. On a side
> note,
> > this is NOT an observation of the April fools. -:-) It really behaves
like
> > this.
> > Any idea?
> >
> > Thanks.
> > Connie
> > --------------
> > security_R5#sh ip bgp ?
> > community Display routes matching the communities
> > community-list Display routes matching the community-list
> > dampened-paths Display paths suppressed due to dampening
> > filter-list Display routes conforming to the filter-list
> > flap-statistics Display flap statistics of routes
> > inconsistent-as Display only routes with inconsistent origin ASs
> > ipv4 Address family
> > neighbors Detailed information on TCP and BGP neighbor
> connections
> > paths Path information
> > peer-group Display information on peer-groups
> > quote-regexp Display routes matching the AS path "regular
> expression"
> > regexp Display routes matching the AS path regular
expression
> > summary Summary of BGP neighbor status
> > vpnv4 Display VPNv4 NLRI specific information
> > | Output modifiers
> > <cr>



This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:45 GMT-3