From: boby2kusa (boby2kusa@hotmail.com)
Date: Tue Apr 01 2003 - 15:16:56 GMT-3
Looks like you'll need 12.1(13)EW train IOS to do PBR on supIII.
As of February 2003, 12.1(13)EW is the latest 12.1EW IOS release for the
Catalyst 4500. Software features such as PBR, DBL, Port Security, Jumbo
Frames, as well as support for the Catalyst 4500 NetFlow Services Card,
1000BaseT GBIC and the AGM module are contained in this release. The
Catalyst 4500 12.1EW IOS release train will continue to be the vehicle to
offer the latest hardware and software features.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/relnotes/ol_3739
.htm#295917
Configuring PBR on SupIII should the same as PBR on the router.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/qos_
c/qcprt1/qcdpbr.htm
----- Original Message -----
From: "Nishant Sharma (IT)" <NishantS@daksh.com>
To: "boby2kusa" <boby2kusa@hotmail.com>; <ccielab@groupstudy.com>
Sent: Tuesday, April 01, 2003 9:13 AM
Subject: RE: routing VLANs through a 4006
I have cat 4006 with sup III and i wish set PBR for a particular vlan so
that traffic for that vlan goes out through a specific IP.
-----Original Message-----
From: boby2kusa [mailto:boby2kusa@hotmail.com]
Sent: Tuesday, April 01, 2003 10:38 PM
To: Nishant Sharma (IT); ccielab@groupstudy.com
Subject: Re: routing VLANs through a 4006
Not enough information. 4006 is a layer 2 device unless it has a layer 3
module or the supervisor is a SupIII or SupIV. As you know, layer 2 will
not do any routing for you. So, what actually is the goal? what is the
topology like?
----- Original Message -----
From: "Nishant Sharma (IT)" <NishantS@daksh.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, April 01, 2003 6:24 AM
Subject: routing VLANs through a 4006
> How do I route traffic of a specific VLAN through a specific IP on a
catalyst
> 4006?
>
> -----Original Message-----
> From: Jonathan V Hays [mailto:jhays@jtan.com]
> Sent: Tuesday, April 01, 2003 7:51 PM
> To: Nishant Sharma (IT)
> Subject: RE: CCIE #11374
>
>
> Please start a new thread by changing the Subject header. For example:
> "routing VLANs through a 4006".
>
> Thanks.
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > Behalf Of Nishant Sharma (IT)
> > Sent: Tuesday, April 01, 2003 5:52 AM
> > To: ccielab@groupstudy.com
> > Subject: RE: CCIE #11374
> >
> >
> > How do I route traffic of a specific VLAN through a specific
> > IP on a catalyst 4006?
> >
> >
> > --------------------------------------------------------------
> > ---------------
> > --------------------------
> > "The information in this e-mail is the property of Daksh and
> > may be confidential and privileged. It is intended solely for
> > the addressee. Access to this email by anyone else is unauthorised.
> >
> > If you are not the intended recipient, any disclosure,
> > copying, distribution or any action taken in reliance on it
> > is prohibited and may be unlawful. If you receive this
> > message in error, please notify the sender immediately and
> > delete all copies of this message."
> > --------------------------------------------------------------
> > ---------------
> > -------------------------
> >
> >
>
>
>
>
> --------------------------------------------------------------------------
--- > -------------------------- > "The information in this e-mail is the property of Daksh and may be > confidential and privileged. It is intended solely for the addressee. > Access to this email by anyone else is unauthorised. > > If you are not the intended recipient, any disclosure, copying, > distribution or any action taken in reliance on it is prohibited and > may be unlawful. If you receive this message in error, please notify > the sender immediately and delete all copies of this message." > -------------------------------------------------------------------------- --- > ------------------------- >---------------------------------------------------------------------------- --------------------------- "The information in this e-mail is the property of Daksh and may be confidential and privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorised.
If you are not the intended recipient, any disclosure, copying, distribution or any action taken in reliance on it is prohibited and may be unlawful. If you receive this message in error, please notify the sender immediately and delete all copies of this message." ---------------------------------------------------------------------------- --------------------------
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:44 GMT-3