From: boby2kusa (boby2kusa@hotmail.com)
Date: Tue Apr 01 2003 - 14:07:33 GMT-3
Not enough information. 4006 is a layer 2 device unless it has a layer 3
module or the supervisor is a SupIII or SupIV. As you know, layer 2 will
not do any routing for you. So, what actually is the goal? what is the
topology like?
----- Original Message -----
From: "Nishant Sharma (IT)" <NishantS@daksh.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, April 01, 2003 6:24 AM
Subject: routing VLANs through a 4006
> How do I route traffic of a specific VLAN through a specific IP on a
catalyst
> 4006?
>
> -----Original Message-----
> From: Jonathan V Hays [mailto:jhays@jtan.com]
> Sent: Tuesday, April 01, 2003 7:51 PM
> To: Nishant Sharma (IT)
> Subject: RE: CCIE #11374
>
>
> Please start a new thread by changing the Subject header. For example:
> "routing VLANs through a 4006".
>
> Thanks.
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > Behalf Of Nishant Sharma (IT)
> > Sent: Tuesday, April 01, 2003 5:52 AM
> > To: ccielab@groupstudy.com
> > Subject: RE: CCIE #11374
> >
> >
> > How do I route traffic of a specific VLAN through a specific
> > IP on a catalyst 4006?
> >
> >
> > --------------------------------------------------------------
> > ---------------
> > --------------------------
> > "The information in this e-mail is the property of Daksh and
> > may be confidential and privileged. It is intended solely for
> > the addressee. Access to this email by anyone else is unauthorised.
> >
> > If you are not the intended recipient, any disclosure,
> > copying, distribution or any action taken in reliance on it
> > is prohibited and may be unlawful. If you receive this
> > message in error, please notify the sender immediately and
> > delete all copies of this message."
> > --------------------------------------------------------------
> > ---------------
> > -------------------------
> >
> >
>
>
>
>
> --------------------------------------------------------------------------
--- > -------------------------- > "The information in this e-mail is the property of Daksh and may be > confidential and privileged. It is intended solely for the addressee. > Access to this email by anyone else is unauthorised. > > If you are not the intended recipient, any disclosure, copying, > distribution or any action taken in reliance on it is prohibited and > may be unlawful. If you receive this message in error, please notify > the sender immediately and delete all copies of this message." > -------------------------------------------------------------------------- --- > -------------------------
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:44 GMT-3