From: tria_ka@gmx.net
Date: Sun Mar 30 2003 - 02:57:13 GMT-3
maybe there is a mistake .
so what about the class DNS ?
my solution is:
1500(defaultvalue) / 11500 *128 = 16.7 * 0.75 = 2.5
==> is this the value that i nee for
class DNS
bandwidth 12.5 and not 16 !!???
queue-limit 100
th anks to all
udo
> ======= 2003-03-27 13:21:00 DzTZ@4PEVPP45@#:=======
>
> >Hi Scott,
> >
> >If I may, I wouldn't allocate 100 of the bandwidth to the classes and
> >would keep the default to 75 . If you want to assign more than 75 to
> >the classes, that's fine but not up to 100.
> >
> >In other words, I'd rather use this formula for queue #1:
> >128 kbps * (1000/11500) * 0.75 = 8 (bandwidth 8)
> >In percentage, this gives us:
> >(1000/11500) * 0.75 = 6.5 (bandwidth percent 6)
> >
> >May be I am missing something here so any input?
> >
> >Fabrice
> >http://www.6colabs.com
> >
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> >Scott M. Livingston
> >Sent: Monday, March 24, 2003 8:01 PM
> >To: 'Abdul Waheed Ghaffar'; ccielab@groupstudy.com
> >Subject: RE: QOS
> >
> >Here is my attempt. For these scenarios if I can spot the bandwidth
> >percent real quick then I just use the 'bandwidth percent' command. In
> >my own freakish way of thinking I can convert it quicker using the
> >formula below. Tell me what you all think and please let me know if I
> >messed up somewhere.
> >
> >BW of Link in kbps * (byte count / total byte count) = BW
> >
> >For example:
> >
> >Queue #1
> >---------
> >128 kbps * (1000 / 11500) = 11
> >
> >!
> >class-map match-all TELNET
> > match protocol telnet
> >class-map match-all DLSW
> > match protocol dlsw
> >class-map match-all FTP
> > match protocol ftp
> >class-map match-all DNS
> > match protocol dns
> >!
> >policy-map MORE-FUN
> > class TELNET
> > bandwidth 11
> > queue-limit 100
> > class DNS
> > bandwidth 16
> > queue-limit 100
> > class FTP
> > bandwidth 33
> > queue-limit 20
> > class DLSW
> > bandwidth 55
> > queue-limit 20
> > class class-default
> > bandwidth 11
> > queue-limit 20
> >!
> >
> >thank you,
> >scott
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> >Abdul Waheed Ghaffar
> >Sent: Monday, March 24, 2003 7:04 AM
> >To: ccielab@groupstudy.com
> >Subject: QOS
> >
> >Hi group,
> >
> >I need to convert following CQ into CBWFQ
> ># queue-list 1 protocol tcp 1 telnet byte-count 1000 limit 100
> ># queue-list 1 protocol udp 2 domain limit 100
> ># queue-list 1 protocol tcp 3 ftp byte-count 3000
> ># queue-list 1 protocol dlsw 4 byte-count 5000
> ># queue-list 1 default 16 byte-count 1000
> ># interface serial 0/1
> ># custom-queue-list 1
> >
> >can any body giude me...the serial interface is frame-relay encapsulated
> >
> >....will i map the service on physical interface or under class-map
> >frame-relay?
> >
> >thanks in advance
> >
> >
> >
> >_________________________________________________________________
> >The new MSN 8: smart spam protection and 2 months FREE*
> >http://join.msn.com/?page=features/junkmail
>
> = = = = = = = = = = = = = = = = = = = =
>
>
> !!!!!!!!!!!!!!!!VB
> @q#!
>
>
> !!!!!!!!!!!!!!!!Ciscolab
> !!!!!!!!!!!!!!!!ciscolab@vip.sina.com
> !!!!!!!!!!!!!!!!!!!!2003-03-30
>
-- +++ GMX - Mail, Messaging & more http://www.gmx.net +++ Bitte ldcheln! Fotogalerie online mit GMX ohne eigene Homepage!
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:46 GMT-3